重磁处理解释系统软件设计与关键实现技术          下载免费PDF全文

郑元满  姚长利  李泽林  刘强 《地球物理学报》2019,62(10):3744-3759

重磁探测是金属矿勘探的主要手段之一，其处理和解释方法技术已得到很大的发展，研发与其相适应的重磁软件是重要的研究课题.在国家863课题的支持下，我们设计并研发了重磁处理解释集成化软件系统.在分析国内外现有软件不足的基础上，我们对重磁软件系统所应具有的操作行为进行了针对性的设计，提出了具有特色的功能设计思路，并进行了针对性的研发实现.为满足深部矿产资源勘探需求和精细化解释需要，提出了更加具有针对性的软件设计解决方案，研发了特色的处理解释模块，核心突出软件的实时可视化和协同交互操作，使软件系统能高效地服务于使用者的目标任务.在优化改进处理、正反演算法的基础上，提出多核并行化方案并实现，提高了软件整体运行速度.最终形成了将数据管理、数据可视化、数据处理及解释有机结合的特色软件系统，为金属矿探测提供了一个高效、有力的工具.  相似文献   

Experimental investigation on a cabin-suspended catamaran in terms of motion reduction and wave energy harvesting by means of a semi-active motion control system     

《Applied Ocean Research》2019

A novel concept catamaran equipped with a suspended cabin, named Wave Harmonizer Type 4 (WHzer-4), is proposed and evaluated. The mass-spring-mass system is constructed by mounting four sets of suspensions in-between the cabin and the twin-hull. Two sets of dual motor/generators (M/Gs) are attached on the center beam of the cabin's deck fore and aft. Each shaft-end of the dual M/Gs is connected to the twin-hull through a rack-pinion gear unit. In this way the vertical relative motion between the cabin and the twin-hull can be transferred into the rotational motion of the M/Gs, and vice versa. A semi-active motion control system, which contains a proportional-integral (PI) controller, is designed and applied to each of the dual M/Gs for the aim of absorbing wave energy under the condition of suppressing the local vertical velocity of the cabin as much as possible. A 1/5 scale model ship with a length of 1.6 m is built, and a forced-oscillation bench test is implemented to validate the performance of the control system. Then, a series of towing tank tests is carried out in regular head waves. The heave and pitch responses of the cabin, those of the twin-hull and the corresponding wave energy capture width ratio (CWR) at five control scenarios and two reference scenarios are investigated. Discussion on the results of the tank test shows that the motion reduction of the cabin and the wave energy harvesting can be achieved simultaneously at a few wave conditions. However, at other conditions, although noticeable amount of wave energy is harvested, motion reduction of the heave and pitch of the cabin could not be obtained at the same time. It is suggested that varying the gain settings of the PI controllers according to the location of the controllers may improve the effectiveness of the proposed control system.  相似文献   

Experimental study on hydrodynamic performance of SWATH vessels in calm water and in head waves     

《Applied Ocean Research》2019

An extensive experimental investigation on four SWATH hull forms has been conducted in calm water and in regular waves at University of Naples Federico II. Calm water tests have been analyzed in the range of Froude number Fr_T from 0.1 to 0.6. For all four SWATH configurations at the speed, corresponding to Fr_T 0.32, the behaviour in regular waves has been tested. The results of heave, pitch and vertical accelerations are presented in nondimensional form as RAO. For the “most promising” SWATH #4 configuration, a set of stabilizing fins have been designed and an active stabilization system has been developed. The developed SWATH#5 has been tested in calm water on three displacements in the range of Fr_T from 0.1 to 0.65. The dynamic wetted surface has been identified and the residual resistance coefficient C_R as well as R_T/Δ are reported. Seakeeping tests have been performed in regular head sea and in head and following irregular sea at Fr_T = 0.50. The conditions for the occurrence of dynamic longitudinal instabilities have been identified. The results allows to comment the effect of slenderness of struts and SWATH’s immersed bodies on resistance and seakeeping and concerns the applicability of SWATH concept to small craft.  相似文献   

青海省新一代BDS高精度基准服务平台的构建          下载免费PDF全文

李延龙  张生鹏  张永荥 《全球定位系统》2020,45(2):91-97

介绍了青海省新一代北斗卫星导航系统(BDS)高精度基准服务平台.该平台具备用户管理、数据处理、空间环境监控、高精度定位等功能,可以满足系统管理员、行政领导、单位用户和实时动态(RTK)测量用户在内的各种用户的多样化需求,并且遵循了管理标准化、可扩展性强、现势性好、实用性好、安全性强、具有前瞻性等建设原则.  相似文献   

基于二三维一体化的智慧警务地理信息平台建设与研究     

张庆全  袁晓宏  余迎 《测绘与空间地理信息》2020,(2):150-152

"智慧警务"是"智慧城市"的重要组成部分,也是社会治安防控体系发展的必然趋势,应提高认识,积极探索和论证建设"智慧警务"的模式和方法。本文阐述了基于二三维一体化的智慧警务地理信息平台建设内容和总体框架,并详细地介绍了警用地理信息系统及智慧警务应用系统建设内容和技术路线。  相似文献   

基于LiDAR的农田地形环境三维重建方法     

郎朗  冯晓蓉  刘浪 《测绘通报》2020,(2):55-60

为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。  相似文献   

基于GIS的石家庄市雾霾分析     

苏亚聪  史娟  徐爽 《北京测绘》2020,(2):233-237

为了得出雾霾气象成因机制、影响因素和时空分布特征,以石家庄市区与郊县为研究区域,将2013年9月至2016年12月石家庄市各市区、郊县的PM2.5历史监测数据中的有效数据进行了数据分析处理得到雾霾浓度数据,还有温度、降水、风速、地形和人口密度等数据,运用GIS分析的方法,模拟绘制石家庄雾霾的时空分布图、雾霾与各影响因子的专题对比图,得到雾霾形成机制的因子、雾霾的时空分布规律、雾霾季节变化特征、雾霾与地形间的关系等;运用数据分析软件OriginPro8.SR3分析雾霾浓度与风速数据、降雨数据、温度数据间的相关性。  相似文献   

基于MATLAB的铁路路基沉降预测优化方法     

刘鹏鹏  李仲勤 《北京测绘》2020,(4):580-583

高速铁路路基的工后沉降严重影响着行车安全。在已有的预测模型中,所采用的初始数据往往不能满足等时间周期采集,而且还会伴随着一系列不可避免的观测误差,模型本身的误差累计,不能进行长期预测。文中利用最小二乘原理对初始值进行拟合改进,采用Lagrange插值方法将非等间隔序列转为等间隔序列,并基于新陈更替GM(1,1)模型利用MATLAB建立沉降预测模型;在此基础上,提出对模型残差进行GM改正以提高模型精度的方法。研究表明,通过对初始值序列改正后的模型具有较好的适应性,优化改进后的模型预测误差小,预测精度优于新陈更替GM(1,1)模型。  相似文献   

三维地理信息网络服务的发展现状及思考     

孙阳  周海龙  徐爽  董莉 《测绘与空间地理信息》2020,(1):160-162

随着信息技术的发展和GIS的实际发展需求的增加,GIS逐渐转向了三维地理信息网络服务方向。在满足GIS服务发展需求的基础上,三维地理信息网络服务为空间信息的高效集成的实现作出了重要贡献。本文综述了三维地理信息网络服务的发展情况,并提出了存在的问题及相应的建议,以供参考。  相似文献   

车载移动测量系统大比例尺测图精度控制研究     

李俊  王永红  吴波  侯兴泽 《测绘与空间地理信息》2020,(3):101-103

车载移动测量系统作为一种先进的测绘技术,已广泛应用于大比例尺测图项目中。SSW车载激光建模测量系统能够快速、高效、精确地完成大比例尺测图数据采集、处理等工作。不同比例尺对精度的要求不一样,而本文选择若干试验区,探讨不同的数据采集与处理方式对精度的影响,然后制订相应的精度控制方案,提高数据的精度,满足1∶1 000比例尺测图要求。  相似文献